Configuring PPP
This section describes how to configure a dial in line using PPP and includes the
following:
•
PPP configuration procedure on page 82
•
PPP form field descriptions on page
An example of a remote access connection using PPP, including the setup of a remote
user is described in
PPP configuration procedure
cli syntax:
To configure a line using PPP proceed as follows;
set PPP line,
1.
Within the Line Configuration menu, select 'PPP'.
show PPP
line
2.
Now select a line.
The PPP form for the selected line is now displayed as shown in the next picture
(default values shown in this example):
3.
Within the PPP form set all the fields to the values you require. See
field descriptions on page 83
form.
Black Box Console Server user guide
83.
Configuring a dial in line on page
for details of how to set each field within the PPP
74.
PPP form
81