Reboot; Reset Factory; Reset Line - Black Box 16 port User Manual

reboot

user level: This command will reboot the unit. You will be asked to confirm the reboot with the
admin following prompt:
sa v e c o nf i g t o f l a s h RO M y /n
If you press 'y' the unit will save your configuration, close all connections and then
reboot. If you press 'n' the unit will prompt you:
confirm reboot unit y/n
Press 'y' to reboot, 'n' to cancel.
For more information on how the unit reboots, see BOOTP,
Rebooting does not reset the unit to factory default settings.
Syntax
re b o o t
Menu Network Configuration - Reboot
equivalent
See also show server

reset factory

user level: This command will reset the unit to its default values. The unit will save the factory
admin default settings to FLASH memory; this saving will take a few seconds. After this
period you will be logged out and presented with a new login prompt.
Syntax
r e s et f ac t or y
Menu Network Configuration - Reset
equivalent
See also reboot

reset line

user level: This command will reset the specified serial line(s) to the default line configuration.
admin
Syntax
re s et l in e . / n / *
Where:
.
n
Black Box Console Server user guide
specifies the current line.
is a specific serial line number.
Appendix F BOOTP.
160