Show Slip Line - Black Box 16 port User Manual

show slip line

user levels: Use this command to show the SLIP configuration of a line. Admin users can show all
admin, lines; users with normal level privileges can only display the configuration of their own
normal line.
For example:
syntax
show slip line line_number
where
:line_number may also be specified as * for all lines, or . for the current in-use line.
parameters are any from the list below:
parameter syntax
lipaddr
ripaddr
subnet
mtu
priority
transmit_parameters
icmp_suppress
vj_comp
The meanings and values of these parameters are explained in
PPP connections on page
Menu Line Configuration - Line Settings
equivalent
See also set slip line
Black Box Console Server user guide
parameter name
local ip address
remote ip address
subnet mask
maximum transmission unit
interactive priority
transmit parameters
suppress icmp
VJ compression
74.
Introduction to SLIP and
197