Set Slip Line - Black Box 16 port User Manual

set slip line

user level: Use this command to configure SLIP on a line.
admin
syntax
set slip line line_number parameter
where:
line_number may also be specified as * for all lines, or . for the current in-use line.
parameters are any from the list below:
parameter syntax
lipaddr
ripaddr
subnet
mtu
priority
transmit_parameters
icmp_suppress
vj_comp
The meanings and values of these parameters are explained in
PPP connections on page
You can include multiple parameters in one line of syntax (up to a maximum of 100
characters).
Menu Line Configuration - Line Settings
equivalent
See also show slip line
Black Box Console Server user guide
parameter name
local ip address
remote ip address
subnet mask
maximum transmission unit
interactive priority
transmit parameters
suppress icmp
VJ compression
74.
Introduction to SLIP and
180