Black Box 16 port User Manual page 77

Service option Description
Session Timer Enter a period in seconds for which the session timer will run. Use this timer to
router use only forcibly close the session (connection). When the session timer expires the unit
will end the connection. The default value is 0 (zero), meaning that the session
timer will not expire (the session is open permanently, or until you kill the line.
The maximum value is 4294967 seconds (equal to 49 days, approximately).
4. Ignore the other fields in this form. Press <return> to exit; if you do not wish to
save your changes press the <escape> key.
cli syntax: 5. Now go to the Line Configuration Menu:
add modem
6. Within the Line Configuration Menu, select 'Add Modem'.
7. Enter the name of the modem/ISDN TA attached to the unit. You can enter a
maximum of twenty names, each with nineteen alphanumeric characters.
8. Within the Line Configuration Menu, select 'Change Modem'. Select your
modem/ISDN TA name. Enter the initialisation string; see your modem/ISDN TA
documentation.
9. Press <return> to exit; if you do not wish to save your changes press the <escape>
key.
set line 10. Go back to the 'Line Settings' menu. Select your line. When the line parameters
form appears go the field 'modem name'. Press 'L' (upper or lower case) or the
spacebar. Choose the modem name which you entered at Step 5.
11. Press <return> to exit; if you do not wish to save your changes press the <escape>
key.
You can copy the settings for this line to other lines (an option as you exit this
line);
You can reset this line to default (an option as you exit this form); refer to
Resetting the line to default on page 111
12. You may want to save your configuration permanently; if so, refer to Saving
settings to non-volatile memory on page 112.
Black Box Console Server user guide
77