Black Box 16 port User Manual page 72

3. Assign a TCP port number to the unit port using the 'CS Port' field. This TCP
port number will be used by any host wanting to access the unit port. If you select
a TCP port being used by another process, a connection will not be established
(By default, lines are set to TCP port 10001 to 10024 for each port. For example,
Line 1 10001, Line 16 10016).
4. Do not configure the idle and session timers; these timers have no effect on
reverse telnet connections.
5. The 'Hostname' and 'Host Port' fields may contain default or last-used values,
but these will be ignored.
Black Box Console Server user guide
72