Configuring SNMP support
To configure for SNMP support proceed as follows;
1.
From the Main Menu select 'network configuration' and then 'snmp'.
cli syntax:
2.
Select 'snmp contact information' to configure the SNMP sysContact and
set contact
sysLocation objects; an example screen is shown below:
set location
add trap
3.
Select 'edit traps' to create up to four trap communities; an example screen is
delete trap
shown below:
SNMP Trap messages generated by the unit will only be broadcast to hosts defined
by SNMP Trap communities.( note that the unit generates no enterprise specific
traps).
add
4.
Select 'edit communities' to create up to four communities; an example screen is
community
shown below:
delete
community
Black Box Console Server user guide
205