Show User; Start - Black Box 16 port User Manual

show user

user levels: Use this command to display a user's setup, including predefined sessions. The
admin, admin user can show details of any user, a normal user can only view their own
normal details:
Syntax
s h o w u s e r . / u s e r n a m e
Where:
.
username
Menu Admin user: Users - Change User.
equivalent Normal user: Sessions - Set Up User
See also set user

start

all users Use this command to start a predefined session. This is a particularly important
command for restricted users who can only start sessions predefined for them by
system administrator. If you are using telnet, the target host will prompt you for your
login name. If you are using rlogin, the host will prompt you for your password. If
you are using rlogin and your unit's login name is entered in the 'rhost' file of the
target login directory, you will be logged straight in.
Syntax
s t a rt n
Where n is the predefined session that you want to start.
Black Box Console Server user guide
specifies the current user.
is the name of a specific user.
200