Viewing And Editing Your Line Settings; Lines Set To Reverse Telnet By Default - Black Box 16 port User Manual

Viewing and editing your line settings

Lines set to reverse Telnet by default

cli syntax: A reverse telnet connection enables a TCP/IP host on the local network to establish a
set line login connection via a Console Server (the 'unit') port on a non-TCP/IP machine
external to the network, such as routers, servers and so on.
A Typical
Reverse
Telnet
Configuratio
n
To set up a reverse telnet connection, follow these steps:
1. Select Line Settings from the Line Configuration menu then select the line that
you want to configure.
2. Set 'service' to rev tel (default setting).
Note when field is highlighted, pressing L will list all available options.
Black Box Console Server user guide
71