Tftp Configuration - Black Box 16 port User Manual

TFTP configuration

cli syntax: You can configure TFTP in the Console Server (the 'unit'). It is used for transferring
set server tftp files to/from a host; the files could be, for example, configuration, new software or
custom language files. From the Network Configuration Menu, select 'tftp'; you should
see the following:
retry
timeout
Black Box Console Server user guide
tftp
retry
timeout[3
should tftp fail, retry is the number of retries the unit will make to
transfer a file to/from a host. Enter a value between 0 and 255. The
default value is 5. A value of 0 means that the unit will not attempt a
retry.
is the time in seconds the unit will wait for successful transmit or
receipt of tftp packets before retrying a transfer. Enter a value between
1 and 255. The default value is 3.
[5 ]
]
218