Show Radius; Show Routes - Black Box 16 port User Manual

show radius

user levels: Use this command to check the RADIUS settings of the unit:
admin,
normal
Syntax
show radius
The output of this command are the RADIUS settings of the unit (e.g.):
For details of these parameters, see Console Server,
Menu radius configuration - radius settings
equivalent
See also add radius,

show routes

user levels: Use this command to give you a better understanding of your network. It will also show
admin, a single passive gateway configured using bootp. Below is an example:
normal
Syntax
show routes
Menu there is no menu equivalent
equivalent
Black Box Console Server user guide
set radius, set server
RADIUS configuration on page 51.
194