Admin; Debug; Delete Arp; Delete Community - Black Box 16 port User Manual

See also delete WINS,

admin

user level: If you are a normal user, this command enables you to enter Admin mode. But only if
normal you know the admin password. This will give you full access to the unit's commands.
The unit's prompt will change to a hash or pound sign (JS_8500# or JS_8500£) to
indicate that you are in admin mode. You must log out and back in again to revert to
your original mode.
Syntax
a d m in
Menu Sessions - Become Admin User
equivalent

debug

level of user: This command will send debug information to the screen. You can be connected to
admin either the Admin port or a front-mounted port. Use this command only when
instructed by your Technical Support.
Syntax
d e b ug
Menu (none available)
equivalent
See also -

delete ARP

This command enables you to delete the ARP table. This is useful for diagnostic and
debugging purposes.
This command is only available from the CLI.
Syntax
d e l et e a r p
See also show ARP

delete community

user level: This command enables you to delete SNMP communities defined using the add
admin community command.
Syntax
de l et e co m mu ni ty 1 | 2 | 3 | 4
Black Box Console Server user guide
add DNS, show server
148