Connecting The Line Share 120H; Installation On A Single Phone Line With A; Single Phone - Black Box 120H User Manual

3.4 Connecting the Line Share 120H

This section explains how to install the Line Share 120H in most phone
configurations that appear in a home or office. You can install the Line Share
120H in any one of the following phone configurations:
• a single phone line with a single phone
• a single phone line with multiple single-line phones
• a telephone system
Installation procedures for each of these configurations are provided in the
following sections.
To perform the installation procedures in the following sections, you need
the following equipment:
• telephone cables to connect the Line Share 120H to your telephone (wall)
jack.
• extension cables—required if the connecting equipment is not located
near the Line Share 120H.
• additional telephone cables—typically supplied with equipment by the
manufacturer. You need additional telephone cables for as many pieces
of equipment as you intend to connect to the Line Share 120H. If the
equipment manufacturer does not provide the required cables, you can
purchase them from your dealer.
3.4.1 I
NSTALLATION ON A
Figure 3-3 shows a complete installation for a single phone line/single phone
arrangement. While the connections to the telephone (wall) jack may be
different for other types of phone systems, the connections to the Line Share
120H remain the same for all phone configurations.
S -L P
INGLE INE HONE WITH A
CHAPTER 3: Installation
S P
INGLE HONE
13