Black Box 16 port User Manual page 245

To access
JETset
1. Make sure you set 'gui_access' to 'on', see
2. Open your web browser and enter the ip address of your Console Server; e.g.
http://192.101.34.211
You should be presented with the login page:
The program prompts you for a password (for user of name 'admin').
Caution the only access permitted is username 'admin'. Console Server assumes this
username and so prompts you for the password for this user.
On successful login you will be presented with the JETset home page
on page 244
Black Box Console Server user guide
on page 244). From the home page you can now configure your unit.
Chapter 2 Installation
(JETsethome page
245