Add Trap; Add User; Add Wins - Black Box 16 port User Manual

add trap

user level: Use this command to define communities which will receive trap messages generated
admin by the unit. Note that the unit does not generate any enterprise-specific traps. Up to
four trap comunities may be defined.
Syntax
a d d t r a p t ra p_ na me in et ad d re ss
Where:
trap_name
inetaddress
See also add community,

add user

user level: This command enables you to add a new user to the system. You will be prompted to
admin enter a password (maximum sixteen characters). You must also set the user's level
using the set user command.
Syntax
a d d u s e r u se rn am e
Where username is the required login name (maximum sixteen characters).
Menu Users - Add User
equivalent
See also delete user,

add WINS

user level: This command enables you to define the WINS (Windows Internet Naming Service)
admin host or hosts in your network. You can define a maximum of two hosts. If you wish,
it/they can be the same address(es) as a machine(s) already entered in the unit host
table.
Syntax
a d d W I N S i nt er ne t_ a dd re ss
Note 'WINS' must be entered in upper case. Also:
internet address is the internet address of your machine providing the WINS; enter
Menu Network Configuration - WINS - Add WINS
equivalent
Black Box Console Server user guide
is an arbitrary name assigned to the community.
is the internet address that identifies the host(s) in the community.
delete trap, set contact,
set user, show user
the address in dot decimal notation.
set location, show snmp
147