Add Gateway; Add Host - Black Box 16 port User Manual

add gateway

user level: This command enables you to define the gateways in your network. You can add up
admin to twenty gateways and these must be hosts that you have defined in the host table.
Syntax
a d d g a t e w a y h o s t n a m e ty pe [i ne ta d dr es s]
Where:
hostname
type
inetaddress
Your gateway by default is 'active'; you can change it to 'passive'; see the command
set gateway.
Menu Network Configuration - Gateway - Add Gateway
equivalent
See also delete gateway,

add host

user level: This command enables you to add the details of the other hosts in your network.
admin These will be added to the host table. You can also add hosts accessed frequently not
in your LAN.
Syntax
a d d h o s t h os tn am e i ne ta dd r es s
Where:
hostname
inetaddress
Black Box Console Server user guide
is the name of the host that you want to define as a gateway
is the gateway type: default, host or network. The types are:
• Default - this is a gateway which provides general access
beyond your local network.
• Host - this a gateway reserved for accessing a specific host
external to your local network.
• Network - this is a gateway reserved for accessing a specific
network external to your local network.
if you define the type as host or network, you must define the
internet address of the target host or network.
set gateway
is the name of the host (14 characters maximum).
is the internet address of the machine.
144