Black Box 16 port User Manual page 178

services
Black Box Console Server user guide
This command allows the ability to enable/disable
specific processes in the Console Server.The services
field is a 4 digit hexidecimal number. The number is
defined as a bit field, each bit being a different process
that is either enabled or disabled. By default, all
processes are enabled with the flag set FFFF). This
service flag will be saved when configuration is saved
to FLASH.
The following options can be used:
Bit Value Option
0 0001 DHCP Process
The DHCP process will be enabled when service flag
is set to 0001. Although DHCP is also controlled by
the command 'set server DHCP <status>', this flag will
be updated accordingly and vice versa.
1 0002 ROUTE Process
The ROUTE process will be enabled on well-know
port 520 when service flag is set to 0002. ROUTE
process can also be enabled/disabled by OEM_mode
bit.
2 0004 Telnet Process
The Telnet process will be enabled on well-known port
23 when the services flag is set to 0004.
3 0008 SSH Process
The SSH process will be enabled on well-known port
22 when the services flag is set to 0008.
4 0010 HTML Process
The HTML process will be enabled on well-known
port 80 when the services flag is set to 0010. Note that
disabling the server's services flag for HTML process
is different than GUI_ACCESS configuration in such
that there will be no response from the server when the
HTML process is disabled.
178