Lost Password - Black Box 16 port User Manual

6. The line should now be configured similar to that shown in the next picture:
7. Press <return> to exit; if you do not wish to save your changes press the <escape>
key.
8. If you want to configure all lines with the same parameters, refer to
line to default on page

Lost password

If you are an admin user, and you lose your password, there is no way of logging in
without it. This restriction is for security reasons. Unless there is another user with
admin level privileges (who will have the ability to change your password) you will have
to reset the Console Server (the 'unit') to its factory default settings.
cli syntax: If a user forgets his/her password, you can assign a new password; go to the Users Menu
set user and select 'set password'.
Black Box Console Server user guide
111.
Resetting the
73