access rule will not be configured. Ticking the All Ports check box will denote all ports on the
Switch.
To view the settings of a previously correctly configured rule, click the corresponding Show Details button on the Access Rule
List window to view the following window:
To establish the rule for a previously created Access Profile:
To configure the Access Rules for IPv4, open the Access Profile List window and click Add/View Rules for an IPv4 entry. This
will open the following window:
To remove a previously created rule, click the corresponding Delete Rules button. To add a new Access Rule, click the Add Rule
button:
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 10- 18. Access Rule Detail Information window for IPv6
Figure 10- 19. Access Rule List window for Packet Content
163