D-Link DGS-3200 Series User Manual page 241

Safeguard Safeguard Engine is in
Engine normal mode
Safeguard Engine is in
filtering packet mode
Packet Broadcast strom
occurrence
Storm
Broadcast storm
cleared
Multicast storm
occurrence
Multicast storm cleared Port <unitID:portNum>
Port shut down due to a
packet storm
JWAC
Login OK
Login Fail
Logout normal
Logout forcibly
Age out
Loopback
Port loop occurred
Detection
Port loop detection
restarted after interval
time
Port with VID loop
occurred
Port with VID Loop
detection restarted after
interval time
802.1x VID assigned from
RADIUS server after
RADIUS client
authenticated by
RADIUS server
successfully. This VID
will assign to the port
and this port will be the
VLAN untagged port
member.
Ingress bandwidth
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Safeguard Engine enters
NORMAL mode
Safeguard Engine enters
EXHAUSTED mode
Port <unitID:portNum>
Broadcast storm is occurring
Port <unitID:portNum>
Broadcast storm has cleared
Port <unitID:portNum>
Multicast storm is occurring
Multicast storm has cleared
Port <unitID:portNum> is
currently shut down due to a
packet storm
JWAC login successful
(Username:%s,IP:%s,MAC:%s
,Port:%s)
JWAC login rejected
(Username:%s,IP:%s,MAC:%s
,Port:%s)
JWAC host logout normally
(Username:%s,IP:%s,MAC:%s
,Port:%s)
JWAC host logout forcibly
(Username:%s,IP:%s,MAC:%s
,Port:%s)
JWAC host age out
(Username:%s,IP:%s,MAC:%s
,Port:%s)
Port <[unitID:]portNum> LBD
loop occurred. Port blocked.
Port <[unitID:]portNum> LBD
port recovered. Loop
detection restarted.
Port <[unitID:]portNum> VID
vvlanID> LBD loop occurred.
Packet discard begun.
Port <[unitID:]portNum> VID
<vlanID> LBD recovered.
Loop detection restarted.
Radius server <ipaddr>
assigned vid :<vlanID> to
port <[unitID:]portNum>
(account :<username> )
Radius server <ipaddr>
Informational
Warning
Warning
Informational
Warning
Informational
Warning
Informational
Warning
Informational
Warning
Informational
Informational
Informational
227
stand-alone device port
<portNum>
stackable device Port:
<unitID:portNum>
stand-alone device port
tN