D-Link DGS-3200 Series User Manual page 124

Settings in handling a Traffic Storm is one of the following:
•
•
•
•
This function cannot be implemented in the hardware mode. (When Drop is chosen for the Action
parameter.
Click Apply to implement the settings of each field.
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
None – Will send no Storm trap warning messages regardless of action taken by the Traffic
Control mechanism.
Storm Occurred – Will send Storm Trap warning messages upon the occurrence of a
Traffic Storm only.
Storm Cleared – Will send Storm Trap messages when a Traffic Storm has been cleared
by the Switch only.
Both – Will send Storm Trap messages when a Traffic Storm has been both detected and
cleared by the Switch.
NOTE: Traffic Control cannot be implemented on ports that are set for
Link Aggregation (Port Trunking).
NOTE: Ports that are in the Shutdown Forever mode will be seen as
Discarding in Spanning Tree windows and implementations though these
ports will still be forwarding BPDUs to the Switch's CPU.
NOTE: Ports that are in Shutdown Forever mode will be seen as link down
in all windows and screens until the user recovers these ports.
110