D-Link DGS-3200 Series User Manual page 187

To set the Access Rule for Ethernet, adjust the following parameters and click Apply.
Parameter Description
Access ID (1-100) Type in a unique identifier number for this access. This value can be set from 1 to 100.
Action Select Permit to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select Deny to specify that packets that do not match the access profile are not forwarded by the
Switch and will be filtered.
Ethernet Type (0- Enter the appropriate Ethernet Type information.
FFFF)
Tick the check box and enter the name of the Time Range settings that has been previously
Time Range
configured in the Time Range Settings window. This will set specific times when this access rule
Name
will be implemented on the Switch.
Ports Ticking the All Ports check box will denote all ports on the Switch.
To view the settings of a previously correctly configured rule, click the corresponding Show Details button on the CPU Access
Rule List window to view the following window:
Figure 10- 33. CPU Access Rule Detail Information window for Ethernet
To establish the rule for a previously created CPU Access Profile:
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 10- 32. Add Access Rule window for Ethernet
173