SNTP Settings
SNTP or Simple Network Time Protocol is used by the Switch to synchronize the clock of the computer.
The SNTP Settings folder contains two windows: Time Settings and Time Zone Settings.
Time Settings
To configure the time settings for the Switch, open the Configuration folder, click SNTP Settings, and then click the Time
Settings link, revealing the following window for the user to configure.
The following parameters can be set or are displayed:
Parameter
SNTP State
Current Time
Time Source
SNTP First Server
SNTP Secondary Server
SNTP Poll Interval In
Seconds (30-99999)
Date (DD/MM/YYYY)
Time (HH:MM:SS)
Click Apply to implement your changes.
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 6- 31. Time Settings window
Description
Use this radio button to enable or disable SNTP.
Displays the Current Time.
Displays the time source for the system.
The IP address of the primary server from which the SNTP information will be taken.
The IP address of the secondary server from which the SNTP information will be taken.
The interval, in seconds, between requests for updated SNTP information.
Enter the current day, month, and year to update the system clock.
Enter the current time in hours, minutes, and seconds.
Status
SNTP Settings
Set Current Time
51