D-Link DGS-3200 Series User Manual page 156

To configure a port or range of ports for the MAC-Based Access Control feature, use the From Port and To Port drop-down
menus to choose the ports, and then use the State drop-down menu to enable them. The following parameters may be viewed or
set:
Parameter
State
Method
Password
Guest VLAN Name
Guest VLAN Member Ports
From Port
To Port
State
Click Apply to implement the configuration changes.
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 9- 31. MAC Based Access Control Global Settings window
Description
Use this drop-down menu to globally enable or disable the MAC-Based Access
Control function on the Switch.
Use this drop-down menu to choose the type of authentication to be used when
authentication MAC addresses on a given port. The user may choose between the
following methods:
Local – Use this method to utilize the locally set MAC address database as the
authenticator for MAC-Based Access Control. This MAC address list can be
configured in the MAC-Based Access Control Local Database Settings window.
RADIUS – Use this method to utilize a remote RADIUS server as the authenticator for
MAC-Based Access Control. Remember, the MAC list must be previously set on the
RADIUS server and the settings for the server must be first configured on the Switch.
Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is "default".
Displays the name of the previously configured Guest VLAN being used for this
function.
Displays the list of ports that have been configured for the Guest VLAN.
The beginning port of a range of ports to be configured for MAC Based Access
Control.
The ending port of a range of ports to be configured for MAC Based Access Control.
Use this drop-down menu to enable or disable MAC Based Access Control on the port
or range of ports selected in the Port Settings section of this window.
142