Web Pages - D-Link DGS-3200 Series User Manual

Web Pages

When connecting to the management mode of the Switch with a web browser, a login screen is displayed. Enter a user name and
password to access the Switch's management mode.
Below is a list of the folders and windows available in the web interface:
Configuration – Contains the following main folders, windows, and related windows: System Information, Serial Port Settings,
IP Address, IPv6 Interface Settings, IPv6 Route Table, IPv6 Neighbor Settings, Port Configuration, Port Settings, Port
Description, Port Error Disabled, Static ARP Settings, User Accounts, System Log Configuration, System Log Settings, System
Log Host, System Severity Settings, DHCP/BOOTP Relay, DHCP/BOOTP Relay Global Settings, DHCP/BOOTP Relay
Interface Settings, DHCP Auto Configuration Settings, MAC Address Aging Time, Web Settings, Telnet Settings, Password
Encryption, CLIpaging Settings, Firmware Information, Dual Configuration Settings, SMTP Settings, Ping Test, SNTP Settings,
Time Settings, Time Zone Settings, MAC Notification Settings, MAC Notification Global Settings, MAC Notification Port
Settings, SNMP Settings, SNMP Global Settings, SNMP View Table, SNMP Group Table, SNMP User Table, SNMP
Community Table, SNMP Host Table, SNMP v6Host Table, SNMP Engine ID, SNMP Trap Configuration, RMON, Single IP
Management, Single IP Settings, Topology, Firmware Upgrade, Configuration File Backup/Restore, and Upload Log File.
L2 Features – Contains the following main folders, windows, and related windows: Jumbo Frame, 802.1Q VLAN, 802.1Q
VLAN Batch Settings, 802.1Q Protocol VLAN, Protocol VLAN Group Settings, Protocol VLAN Port Settings, GVRP Settings,
PVID Auto Assign Settings, Trunking, LACP Port Settings, Traffic Segmentation, IGMP Snooping, IGMP Snooping Settings, IP
Multicast Profile Settings, Limited Multicast Address Range Settings, MLD Snooping Settings, Port Mirroring, Loopback
Detection Settings, Spanning Tree, STP Bridge Global Settings, STP Port Settings, MST Configuration Identification, STP
Instance Settings, MSTP Port Information, Forwarding & Filtering, Unicast Forwarding, Multicast Forwarding, and Multicast
Filtering Mode.
QoS – Contains the following main folders, windows, and related windows: Bandwidth Control, Traffic Control, 802.1p Default
Priority, 802.1p User Priority, and QoS Scheduling Mechanism.
Security – Contains the following main folders, windows, and related windows: Safeguard Engine, Trusted Host, IP-MAC-Port
Binding, IP-MAC-Binding Port Settings, IP-MAC-Binding Settings, IP-MAC-Binding Blocked, Port Security, Port Security
Settings, Port Lock Entries, Guest VLAN, 802.1X, 802.1X Settings, 802.1X User, Initialize Port(s), Reauthenticate Port(s),
Authentic RADIUS Server, SSL Settings, SSH, SSH Configuration, SSH Authmode and Algorithm Settings, SSH User
Authentication Mode, Access Authentication Control, Authentication Policy and Parameter Settings, Application Authentication
Settings, Authentication Server Group, Authentication Server Host, Login Method Lists, Enable Method Lists, Configure Local
Enable Password, Enable Admin, MAC Based Access Control, MAC Based Access Control Global Settings, MAC Based Access
Control Local MAC Settings, Web Authentication, Web Authentication Settings, Web Authentication User Settings, JWAC,
JWAC Global Settings, JWAC Port Settings, and JWAC User Settings.
ACL – Contains the following main folders, windows, and related windows: Access Profile List, CPU Access Profile List, and
Time Range Settings.
Monitoring – Contains the following main folders, windows, and related windows: CPU Utilization, Port Utilization, Packet Size,
Packets, Received (RX), UMB_cast (RX), Transmitted (TX), Errors, Received (RX), Transmitted (TX), Port Access Control,
RADIUS Authentication, RADIUS Account Client, Authenticator State, Authenticator Statistics, Authenticator Session Statistics,
Authenticator Diagnostics, Browse ARP Table, Browse VLAN, Browse Router Port, Browse MLD Router Port, Browse Session
Table, IGMP Snooping Group, MLD Snooping Group, JWAC Host Table, MAC Address Table, and System Log.
Save – Contains links for Save Configuration ID 1, Save Configuration ID 2, Save Log, and Save All.
Tools – Contains the following windows: Configuration File Backup & Restore, Upload Log File, Reset, Download Firmware,
and Reboot System.
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
NOTE: Be sure to configure the user name and password in the User
Accounts window before connecting the Switch to the greater network.
26