Otto Bock E-MAG Active 17B202N Mounting And Service Instructions page 49

C
Mark the future path of the cable between:
• Knee joint and electronics (Figure 13),
• Electronics and battery (Figure 14).
Then draw the contour of the casing (Figure 15) and the position of the lamination plates
(Figure 15) for the future screw connection of the casing onto the transfemoral socket.
CAUTION
Risk of injury due to joint bar breakage. A broken joint bar on the orthosis can lead to patient injury.
Carefully sand down and smoothen fissures and ridges of the joint bars before laminating the orthosis.
E-MAG Active
E
D
11
13
15
F
H
G
12
14
16
Ottobock | 49