Table of Contents
Advertisement
Figure 45
1. Hydraulic-cylinder support
2.
Fully tilt the hopper.
3.
Assemble the hydraulic-cylinder supports onto
the rods of the hydraulic cylinders
Figure 46
1. Hydraulic cylinder support
Lubrication
Grease Specification
No. 2 lithium grease
Lubricating the Bearings
and Bushings
g272505
Service Interval: Every 50 hours When operating the
1.
2.
g272506
3.
(Figure
46).
g014128
43
machine in extremely dusty and dirty
conditions, lubricate the bearings
and bushings daily. Lubricate
grease fittings immediately after
every washing, regardless of the
interval specified.
Wipe the grease fitting clean so foreign matter
cannot be forced into the bearing or bushing.
Pump grease into the bearing or bushing.
Wipe up any excess grease.
The bearing and bushing lubrication points are
as follows:
Figure 47
g014131
Advertisement
Table of Contents
