Table of Contents
Advertisement
4.
Secure the cover with 6 screws
torque them to 1.5 to 1.7 N-m (13 to 15 in-lb).
5.
Install the handheld remote into the magnetic
remote bracket, slide the halves together to
secure the remote, and tighten the bolt in the
magnet
(Figure
14).
Figure 14
1. Handheld remote
2. Magnetic remote bracket
8
Attaching the Hydraulics to
the Traction Unit
No Parts Required
Procedure
Attach the hydraulic hoses; refer to
Machine to the Traction Unit (page 21)
(Figure
13) and
g028874
3. Bolt in the magnet
Connecting the
9
Connecting the 7-pin Coiled
Power Cable
Parts needed for this procedure:
1
7-pin coiled power cable
Procedure
Connect the 7-pin coiled power cable; refer to
Connecting the Machine to the Traction Unit (page
21).
10
Setting the Electric Brake
Adjustments
No Parts Required
Procedure
Adjust the brake controller; refer to
Brake Controller (page
16
Adjusting the
22).
Advertisement
Table of Contents
