Toro MH-400SH2 Operator's Manual page 2

Material handler, serial no. 403350001 and up
Hide thumbs Also See for MH-400SH2:
Table of Contents

Advertisement

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Electromagnetic Compatibility
Domestic: This device complies with FCC Rules Part 15.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference and (2) this device
must accept any interference that may be received, including
interference that may cause undesirable operation.
This equipment generates and uses radio frequency energy and
if not installed and used properly, in strict accordance with the
manufacturer's instructions, may cause interference to radio
and television reception. It has been type tested and found to
comply within the limits of a FCC Class B computing device in
accordance with the specifications in Subpart J of Part 15 of
FCC Rules, as stated above. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:Reorient the receiving
antenna, relocate the remote control receiver with respect to the
radio/TV antenna or plug the controller into a different outlet so
that the controller and radio/TV are on different branch circuits.If
necessary, the user should consult the dealer or an experienced
radio/television technician for additional suggestions.The
user may find the following booklet prepared by the Federal
Communications Commission helpful: "How to Identify and
Resolve Radio-TV Interference Problems". This booklet is
available from the U.S. Government Printing Office, Washington,
DC 20402. Stock No. 004-000-00345-4.
FCC ID: W7OMRF24J40MDME-Base,
OA3MRF24J40MA-Hand Held
IC: 7693A-24J40MDME-Base, 7693A-24J40MA-Hand Held
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Japan Electromagnetic Compatibility Certification
Handheld:
RF2CAN:
Mexico Electromagnetic Compatibility Certification
Handheld:
RF2CAN:
Korea Electromagnetic Compatibility Certification(Decal
provided in separate kit)
Handheld:
RF2CAN:
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Singapore Electromagnetic Compatibility Certification
Handheld:
TWM240007_IDA_N4021–15
RF2CAN:
TWM-240005_IDA_N4024–15
Morocco Electromagnetic Compatibility Certification
AGREE PAR L'ANRT MAROC
Numero d'agrement:
Delivre d'agrement:
CALIFORNIA
Proposition 65 Warning
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
This machine is intended to be used by professional,
hired operators in commercial applications. It is
primarily designed for transporting, metering, and
dispersing materials.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for product safety and operation
training materials, accessory information, help finding
a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code (if equipped) on the serial
number plate to access warranty, parts, and other
product information.
2
MR 14092 ANRT 2017
29/05/2017
WARNING
Figure 1
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mh-400eh24493144954

Table of Contents