2
Installing the Weight Case
No Parts Required
Procedure
1.
Remove the weights from the weight case.
2.
Remove the bolts (1/2 x 5-1/2 inches) from
the mounting bracket holding the weight case.
Discard the mounting brackets
1. Weight case
3.
Position the weight case on the hitch, as far
forward as possible.
4.
Mount the weight case to the hitch with 2 bolts
(1/2 x 5-1/2 inches) and locknuts. Torque the
locknuts to 91 to 112 N-m (67 to 83 ft-lb).
5.
Fill the weight case with the weights and install
the bar and pin
(Figure
(Figure
5).
Figure 5
2. Weight case mounting
bracket
6).
1. Fill weight case
3
Adjusting the Mirror
No Parts Required
g014067
Procedure
The mirror mounted on the front of the hopper allows
you to monitor the load and the spreading action.
Check the mirror frequently to monitor the operation
of the machine.
Adjust the mirror
inside of the hopper from the operator position.
11
Figure 6
(Figure
7) so that you can view the
g014069