Table of Contents
Advertisement
Figure 17
1. E-S
Button
TOP
Diagnostic LED Function
EH Models
After you pull up the E-S
LED
(Figure
18) illuminates and remains on for 5
seconds, turn off for 5 seconds, and then begins
flashing at 3 Hz (3 flashes a second) until you turn
on the handheld remote. If the light turns on for 5
seconds and then starts blinking at 10 Hz (with or
without a 5 second pause), there is a fault with the
machine; refer to
Checking Fault Codes (page
Note:
If you had the handheld remote on when you
pulled up the E-S
button, the light will not flash
TOP
at 3 Hz (3 flashes per second) after turning off for 5
seconds.
Figure 18
1. Diagnostic LED
button, the diagnostic
TOP
54).
Handheld Remote
EH Models
g234789
1. LCD display
2. Remote status LED
3. All start: starts floor and
option
4. On/Off
5. Store: saves preset
settings
6. Preset 1
7. Preset 2
8. Preset 3
9. All stop: stops all functions 19. Increase option speed
10. Floor start
g234788
19
Figure 19
11. Floor stop
12. Decrease floor speed
13. Increase floor speed
14. Floor reverse
15. Tilt bed down
16. Tilt bed up
17. Option start
18. Option stop
20. Decrease option speed
g028671
Advertisement
Table of Contents
