Operating The Hydraulic Controls And Options - Toro MH-400SH2 Operator's Manual

Operating the Hydraulic
Controls and Options
EH Models
Remote Control System
The remote control system consists of a handheld
remote, a +12 to +14.4 VDC Base Unit, and a wire
harness. The system is specifically designed to be
used with and to control a MH-400 Material Handler.
Button Functions
Button Name Primary Function
O /O Power the remote on and off.
N FF
A S Provides functional control on both the Floor and Option including on/off and
LL TART
displaying the speed.
F S Provides functional control of the hopper conveyor floor belt including on/off
LOOR TART
and displaying the floor speed.
F S Stops the Floor.
LOOR TOP
F D Decreases the Floor speed.
LOOR EC
30
Handheld Remote
Figure 31
1. LCD display
2. Remote status LED
3. All start: starts floor and
option
4. On/Off
5. Store: saves preset
settings
6. Preset 1
7. Preset 2
8. Preset 3
9. All stop: stops all functions 19. Increase option speed
10. Floor start
11. Floor stop
12. Decrease floor speed
13. Increase floor speed
14. Floor reverse
15. Tilt bed down
16. Tilt bed up
17. Option start
18. Option stop
20. Decrease option speed
g028671