Operation; Functions Of The Control Panel - Leica CV5030 Operating Manual

5.1

Functions of the control panel

The LED indicators
LED
LED
LED
LED
LED
LED
Leica CV5030 – Robotic Coverslipper
Is illuminated in red as long as the instrument is not ready for coverslipping.
Is illuminated in green when, after the instrument starts up, all preparations
are complete and coverslipping can begin.
Is illuminated in green during the coverslipping operation.
Is illuminated in green after the PAUSE button has been pressed, the READY
LED is illuminated in red and an alarm signal is output that can be acknowl-
edged using the RESPOND button.
PAUSED appears in the display.
Is illuminated in red after an error has occurred.
The associated error message appears in the display.
The control panel
It consists of a membrane key-
board with ten pushbuttons, four
LED indicators and a two-line
LCD display.
• It is used to control the func-
tions of the instrument and to
display the software status.
• It indicates the current status
of the coverslipping machine
and operations in progress.
• It enables programming of the
coverslipping operation.
• It displays informational and
error messages.
Fig. 29

5. Operation

27