Description Of The Control Panel - Leica EM TXP Operating Manual

5. 5.

Description of the control panel

Change speed from 300 to 20000rpm using
+/- button.
Set advance indication to zero.
Page 16 Operating Manual Leica EM TXP 10/10 Page 16 Operating Manual Leica EM TXP 10/10
Freeze advance indication.
Change speed of the E_W spindle
movement from 0.025 to 0.5 mm/sec. Press
button again to change over to set the
lubricant flow from 2 to 20 ml/min .(value is
displayed on the upper left corner of the
LCD display). Use +/- button to set values.
Button to activate force function. Press
button longer than one second to set force
limit (LED blinks) using +/- button.
Press button once DIST is displayed to set
distance count down or press it again to set
TIME count down value with the +/- button
while the LED is blinking.