Intended Use - ProMinent Flow Control 3 Operating Instructions Manual

Safety Chapter
NOTICE!
National regulations
Please observe the relevant national regu‐
lations and the information provided in the
operating instructions at all phases of the
unit's service life
10
2.4

Intended Use

NOTICE!
Intended use
The Flow Control is solely designed for
reporting back to a metering pump of the
product range gamma/ L the pulses of the
volume flow in the liquid feed chemical
from it. If there are no acknowledgement
pulses, the Flow Control thereby indicates
that no medium is being metered, e.g. pos‐
sibly due to a blocked suction or discharge
line on the metering pump, empty dosing
tank or air in the liquid end etc.
Only use the unit in accordance with the
technical data and specifications provided
in these operating instructions and in the
operating instructions for the individual
components.
All other uses or modifications are pro‐
hibited.
NOTICE!
Without adapter
The Flow Control can only be screwed
directly (without adapter) onto plastic liquid
ends.
Rupturing of the discharge line
The Flow Control cannot display a rupture
of the discharge line on the metering
pump.