Port
3D Sync In/3D Sync Out
Ethernet
RS232
GPIO
Connecting a video source using HBMIC
The high bandwidth multi-input card (HBMIC) accepts digital video data from QSFP+, DisplayPort,
HDMI, and 12G, 6G, 3G, and HD SDI sources.
Enables connection of any one of the input standards, processes it, and routes it to the backplane
interface. The module allows for concurrent processing of HDMI 2.0, DisplayPort 1.2, and SDI inputs
to enable preview capability and fast syncing/switching between inputs. It can also be switched to
Christie Link mode allowing interfacing with the Christie Link transmitter.
Connecting a video source using DisplayPort
The Twin DisplayPort input card (TDPIC) accepts digital video data from the DisplayPort sources.
Enables connection of one DisplayPort cable to a TDPIC card. In this configuration the DisplayPort
input supplies the entire video raster.
This card may or may not be included with your model. Standard inputs are subject to change.
Boxer 30 (Bb.2) Installation and Setup Guide
020-102017-08 Rev. 1 (02-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Connecting devices and establishing communication
Description
Supported for 3D-enabled projectors.
Connects to the web user interface and can send Christie serial
commands.
Sends Christie serial commands using a standard RS232 serial
cable.
Provides a method for controling the projector using electrical
signals.
34