Connecting An Hdmi Video Source - Christie Griffyn 4K50-RGB Installation And Setup Manual

Hide thumbs Also See for Griffyn 4K50-RGB:
Table of Contents

Advertisement

ID
Port
A
HDMI
B
SDI
C
DisplayPort
D
Christie Link
E
SDVoE
F
USB -C
G
USB 3.0-A
H
Ethernet
I
3D Sync In/3D Sync Out
J
Christie Link
K
RS232
L
GPIO
M
Audio Out
N
HDBaseT
O
Wired keypad

Connecting an HDMI video source

For the projector to accept digital video data from HDMI sources, plug the HDMI source directly into
the Video Input panel.
The input configurations listed below are supported.
Input configuration
One-Port
Christie Griffyn Series Installation and Setup Guide
020-103314-08 Rev. 1 (06-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Connecting devices and establishing communication
Description
Accept digital video data from HDMI 2.0 input
with HDCP 2.2 and 1.4 support.
Accepts digital video data from 12G, 6G, 3G, and
HD SDI sources.
Accepts digital video data from DisplayPort 1.2
input with HDCP 1.3 support.
Accept digital video data from QSFP+ 40 GB
optical Christie Link input.
Accept digital video data from SDVoE input.
Connects a USB-C flash drive that has been
formatted with a FAT32 file system. Can be used
for upgrades, backups, restores, and
interrogators.
Connects a USB flash drive that has been
formatted with a FAT32 file system. Can be used
for upgrades, backups, restores, and
interrogators.
Ethernet, and network connection for remote
control. 10/100/1000 Base-T Ethernet x 1
ruggedized connector.
Supported for 3D-enabled projectors.
Reserved for future use.
Sends/receives Christie serial commands using a
standard RS232 serial cable.
Provides a method for controlling the projector
using electrical signals.
Reserved for future use.
Accepts HDBaseT V2.0 signals. HDBaseT x 1
ruggedized connector.
Physically connects a remote control to the
projector.
Description
Enables connection of one HDMI cable. Supports both 2D and 3D frame-packed, top
and bottom. In this configuration, the HDMI input supplies the entire video raster.
Default
SDVoE
enabled
enabled
X
X
X
X
X
X
X
X
X
51

Advertisement

Table of Contents
loading

Table of Contents