Connecting A Video Source Using Hbmic - Christie Mirage 4K40-RGB Installation And Setup Manual

Input configuration
Four-Port, Dual-Input 3D
One-Port
One-Port, Dual-Input 3D
This card may or may not be included with your model. Standard inputs are subject to change. Refer
to the Mirage 4K40-RGB Specifications Guide (P/N: 020-103016-XX) for more details.
Related information
THIC video formats for Mirage projectors (on page 54)
Dual-input 3D for Mirage projectors (on page 55)

Connecting a video source using HBMIC

The high bandwidth multi-input card (HBMIC) accepts digital video data from QSFP+, DisplayPort,
HDMI, and 12G, 6G, 3G, and HD SDI sources.
Part number: 144-116109-XX
Input configuration
One-Port
One-Port, Dual-Input 3D
This card may or may not be included with your model. Standard inputs are subject to change.
Mirage 4K40-RGB Installation and Setup Guide
020-103014-03 Rev. 1 (08-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Connecting devices and establishing communication
Description
input image. This configuration supports high resolution and
high frame rate input video streams.
May be used for Dual-Input 3D configurations.
Enables connection of one HDMI cable to the 1-IN input of a
THIC card (in any slot). In this configuration, the HDMI input
supplies the entire video raster.
May be used for Dual-Input 3D configurations.
Description
Enables connection of any one of the input standards,
processes it, and routes it to the backplane interface. The
module allows for concurrent processing of HDMI 2.0,
DisplayPort 1.2, and SDI inputs to enable preview capability
and fast syncing/switching between inputs. It can also be
switched to Christie Link mode allowing interfacing with the
Christie Link transmitter.
May be used for SDI inputs.
Requirements
Four THIC cards
One THIC card
One THIC card
Requirements
1 HBMIC card
1 HBMIC card
42