Preparing The Interbus Interface Module; Creating The Configuration List - Festo Compact Performance CP-FB6-E Manual

2. Commissioning

2.2 Preparing the INTERBUS interface module

2.2.1 Creating the configuration list

Configuration Before commissioning or programming you must create
list a configuration list of all connected field bus stations.
On the basis of this list, you can:
• Make a comparison between the NOMINAL and
• Access these specifications during a syntax check of
Configuration of the CP system requires a very accu-
rate procedure, as different configuration specifications
may be required for each system due to the modular
structure. Please also observe the specifications in sub-
sequent sections.
2-4
ACTUAL configurations, in order to detect any
addressing errors
a program, in order to avoid addressing errors.
CP FB6-E 9809c