3. Diagnosis
LEDs
LED designation
RC
Remote bus check
BA
Bus active
RD
Remote bus disable
POWER
Operating voltage display of
internal electronics
POWER V
Operating voltage display of
valves
0..3
CP string LED
3.1.2 Normal operating status
In normal operating status the following LEDs on CP
node 6 light up:
LEDs
Operating status
RC
normal
BA
RD
POWER
POWER V
0...3 ERROR
3-4
(
= lights up;
= LED flashes;
Meaning
Lights up when connection is
made to the master
Lights up during data transfer
Lighs up when data transfer
on the bus is interrupted or
when interface "REMOTE OUT"
is switched off.
Lights up when operating
voltage is applied to pin 1 and
the node is ready to operate.
Lights up when operating
voltage is OK (pin 2)
In starting phase:
blinks if the string assignment
has been modified since last
operation.
During operation:
lights up if a CP connection
is interrupted.
= out)
Error treatment
none
CP FB6-E 9809c