Other Instructions; Preprocessing; Periphery Faults (Pf) - Festo Compact Performance CP-FB6-E Manual

2. Commissioning

2.4.4 Other instructions

Preprocessing

Under preprocessing on the INTERBUS we understand
the logical linking of the processing data within the IN-
TERBUS module (previously called "Event programm-
ing" or "Receive bit manipulation").
PLEASE NOTE
All the inputs/outputs of a CP system can be prepro-
cessed.

Periphery faults (PF)

If a fault is recognized by the CP system, a periphery
fault will also be triggered, transmitted to the module
and displayed there. The causes of the fault in the CP
system can, however, be partly suppressed (see Chap-
ter 3.3.2).
Periphery faults do not cause the system to stop. You
can determine the reaction to periphery faults by par-
ametrizing the module. You can also acknowledge the
periphery fault by parametrizing the INTERBUS mo-
dule.
CP FB6-E 9809c
2-27