Festo Compact Performance CP-FB6-E Manual page 16

1. Installation
Dual in-line Set the following functions on the DIL switch:
switch
– Switch the automatic valve test on/off
– Select the common error messages/periphery
– Manufacturer-specific addressing
DIL switch Switch
(factory
setting)
1 ON
2
3
4
CP FB6-E 9809c
messages
(byte swap) on the INTERBUS
Function description
Valve test
1 ON: CP system start without valve test
OFF: CP system start with valve test
(operation see chapter 3.2)
Select common error messages/
periphery messages
2 OFF: all error messages are transmitted
ON: only error messages 3, 4, 5 are
transmitted (see chapter 3.3.2)
3 ON: must be set at ON
OFF: reserved for internal test purposes
Manufacturer-specific addressing
4 (byte swap):
OFF: "Siemens mode"
ON: "Standard mode" (other controllers)
1-5