Festo Compact Performance CP-FB6-E Manual page 36

2. Commissioning
The following dialogue window will then appear:
Fig. 2/2: Dialogue window "Insert Device"
Enter the following in the dialogue fields:
• ID Code
• Process Data Channel
1)
• Device Type:
• Save these entries with OK.
CP FB6-E 9809c
Always enter Ident-code 3 for a CP system (with in-
puts and outputs).
Enter here the number of inputs and/or outputs
on your CP system. The last used string is decisive
here (see CP system manual).
CP system last Equipment on CP
used string system (assigned
address range)
0 Up to 16 inputs/outputs
1 Up to 32 inputs/outputs
2 Up to 48 inputs/outputs
3 Up to 64 inputs/outputs
Valves and/or electrical outputs
The default entry "Remote bus device" can be ente-
red.
Process data
channel bits
1)
16
1)
32
1)
48
1)
64
2-7