Connection To The Remote Bus; Floating Remote Bus; Connecting To Optical-Fibre Waveguide - Festo Compact Performance CP-FB6-E Manual

1. Installation

1.4 Connection to the remote bus

1.4.1 Floating remote bus

The field bus node is prepared for floating operation on
the remote bus. Check the valid standards and guide-
lines for your application to see if a floating structure is
suited to your requirements. Further information on in-
stalling an INTERBUS system can be found in the IN-
TERBUS installation manual. Obtainable from:
Phoenix Contact GmbH & Co.
Postfach 1341
32 819 Blomberg, Germany
Article:
Order no. : 27 54 28 6

Connecting to optical-fibre waveguide

Connection to the bus can also be made with a optical-
fibre waveguide. Contact connectors offer a ready-to-
use data transfer system "ZYLIN RS485" for this pur-
pose. This can be connected to the valve terminal. The
ZYLIN RS485 system is self-supplying and consists of
two pin-compatible 9-pin IP 67 round plugs, integrated
optoelectronics and plastic optical-fibre waveguide.
1-10
IBS SYS INST UM
CP FB6-E 9809c