Avaya J129 Installing And Administering page 90

Appendix
Parameter name
OCSP_TRUSTCERTS
OCSP_URI
OCSP_USE_CACHE
OCSP_URI_PREF
OUTBOUND_SUBSCRIPTION_R
EQUEST_DURATION
OPUS_PAYLOAD_TYPE
P
PER_MODEL_SETTINGS
PHNCC
PHNDPLENGTH
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Default value Description
Specifies the list of OCSP trusted certificates that
are used as OCSP signing authority for checking
the revocation status of the certificate. This applies
to when the OCSP responder is using a different
CA.
Null Specifies the single locally configured IP address
or an FQDN of an OCSP responder. Embedded
spaces are not allowed. Valid range if from 0 to 255
ASCII characters.
1 Specifies that the OCSP caching is in use. Value
operation:
• 0: Checks the OCSP responder and disables the
use of OCSP caching.
• 1: Enables the use of OCSP caching.
1 Specifies the preferred URI for use in an OCSP
request when more than one source is available.
Value operation:
• 1: Checks the OCSP_URI and then the OCSP
field of the Authority Information Access (AIA)
extension of the certificate.
• 2: Checks the OCSP field of the Authority
Information Access (AIA) extension of the
certificate and then the OCSP_URI.
86400 Specifies the duration in seconds requested by the
phone in SUBSCRIBE messages, which can be
decreased depending on the response from the
server.
Valid values are 60 through 31536000 (one year).
The default value is 86400 (one day).
116 Dynamically specifies the RTP payload type to be
used for OPUS codec. The parameter is used
when the media request is sent to the far-end in an
INVITE or 200 OK when INVITE with no Session
Description Protocol (SDP) is received. The range
is between 96 to 127.
1 Specifies the country code for United States. The
value is 1.
Valid values 1 to 999.
5 Specifies the internal extension number length.
Comments on this document? infodev@avaya.com
Table continues...
90