Chapter 5: Configuring Date And Time - Avaya J129 Installing And Administering

Chapter 5: Configuring date and time

Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Date & Time.
3. In the SNTP area, configure the following:
• SNTP Server: Type the SNTP server IP address .
• SNTP SYNC Interval: Type the SNTP synchronization time interval to re-synchronize the
phone's local time . The valid time interval is from 60 to 2880 minutes. The default
synchronization time is 1440 minutes.
• GMT Offset: Type the GMT Offset value in hours and minutes between the local standard
time and Greenwich Mean Time (GMT). The offset value ranges from 0:00 to ±12:59.
4. In the Daylight Saving area, configure the following:
• Daylight Saving Mode: The options are :
- Automatic daylight saving time:
- Manual daylight saving activated (time set to DSTOFFSET):
- Manual daylight saving adjustment (as specified by DSTSTART and DSTSTOP):
• DST Offset: Specifies the offset time between standard time and daylight savings time.
The options are: discuss
- 0
- 1 hour
- 2 hour
• DST Start: Specifies the daylight savings time start date and time with a format of either
odddmmmht or Dmmmht; where:
- o represents a one-character ordinal adjective. For example, 1 for first, 2 for second, 3
for third, 4 for fourth, or L for last.
- D represents 1 or 2 ASCII digits or character representing the date of the month.
- ddd represents a three-characters containing the English abbreviation for the day of the
week. For example, Sun for Sunday, Mon for Monday.
- mmm represents a three-character English abbreviation for the month. For example,
Jan for January, Feb for February.
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Comments on this document? infodev@avaya.com
44