Avaya J129 Installing And Administering page 105

Parameter name
SNMPSTRING
SNTPSRVR
SP_DIRSRVR
SP_DIRSRVRPORT
SP_DIRTOPDN
SPEAKERSTAT
SSH_ALLOWED
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Default value Description
Addresses can be in dotted-decimal format (IPv4),
colon-hex format (IPv6, if supported), or DNS
name format, separated by commas without any
intervening spaces.
The list can contain up to 255 characters. The
default value is null.
Null Specifies a security string that must be included in
SNMP query messages for the query to be
processed.
Valid values contain 0 through 32 ASCII
alphanumeric characters.
The default value is null. Null disables SNMP.
Null Specifies a list of addresses of SNTP servers.
Addresses can be in dotted-decimal or DNS name
format, separated by commas without any
intervening spaces.
The list can contain up to 255 characters.
Null Sets the IP address or Fully-Qualified Domain
Name (FQDN) of the LDAP Directory Server.
Valid values are zero or more IP addresses in
dotted-decimal or DNS format, separated by
commas without intervening spaces, to a maximum
of 255 ASCII characters. The default is null.
389 Sets the TCP port number of the LDAP Directory
Server.
The default port number is 389.
Null Sets the Directory Topmost Distinguished Name.
This value must be set to a non-null value to
enable the LDAP application. The default is null,
but DIRTOPDN should be set to the LDAP root
entry.
2 Specifies the operation of the speakerphone.
Value Operation
0: Speakerphone disabled
1: One-way speaker (also called monitor) enabled.
2: Full (two-way) speakerphone enabled.
0 Specifies if SSH is supported.
Value Operation
0: Disabled
Comments on this document? infodev@avaya.com
List of configuration parameters
Table continues...
105