Avaya J129 Installing And Administering page 88

Appendix
Parameter name
MYCERTCAID
MYCERTCN
MYCERTDN
MYCERTKEYLEN
MYCERTRENEW
MYCERTURL
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Default value Description
0: the speakerphone is unmuted
1: the speakerphone is muted
CAIdentifier Specifies an identifier for the CA certificate with
which the SCEP certificate request is to be signed,
if the server hosts multiple Certificate Authorities.
The value can contain zero to 255 ASCII
characters.
$SERIALNO Specifies the Common Name (CN) used in the
SUBJECT of an SCEP certificate request.
The value must be a string that contains either
$SERIALNO" (which will be replaced by the
phone's serial number) or $MACADDR (which will
be replaced by the phone's MAC address), but it
can contain other characters as well, including
spaces.
The value can contain eight ($MACADDR) to 255
characters.
Null Specifies the part the SUBJECT of an SCEP
certificate request that is common for all phones.
The value must begin with a / and can include
Organizational Unit, Organization, Location, State
and Country.
The value can contain Zero to 255 ASCII
characters.
2048 Specifies the bit length of the public and private
keys generated for the SCEP certificate request.
The value is a 4 ASCII numeric digits. The
minimum value is 2048.
90 Specifies the percentage of the identity certificate's
validity interval after which renewal procedure is
initiated.
Valid values are 1 through 99.
Null Specifies the URL of the SCEP server for obtaining
an identity certificate. If the URL is specified in
HTTPS, then the HTTPS is used to send the CSR
to the SCEP server.
Comments on this document? infodev@avaya.com
Note:
/ must used as a separator between
components. Commas do not work with some
servers
Table continues...
88