Avaya J129 Installing And Administering page 108

Appendix
Parameter name
TEAM_BUTTON_RING_TYPE
TIMEFORMAT
TLSDIR
TLSPORT
TLSSRVR
TLSSRVRID
TPSLIST
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Default value Description
it is not a redirect destination of the monitored
station.
Value Operation
0: Disabled. The redirect indication is shown only
on a monitoring station which is redirection
destination.
1: Enabled. The redirection indication is displayed
on all monitoring stations
1 Specifies the alerting pattern to use for team
buttons.
Valid values are 1 through 8. The default value is 1.
Specifies the format for time displayed in the
phone.
Value Operation
0: AM or PM format
1: 24h format
Specifies the HTTPS Server Directory Path.
Valid values can contain 0 to 127 ASCII characters,
without any spaces.
443 Specifies the TCP port used for HTTPS file
downloads from non-Avaya servers.
Valid values are from 0 to 65535.
Specifies the HTTPS server address.
Valid values can contain 0 to 255 ASCII characters,
including commas.
1 Specifies to validate the identity before the TLS
handshake.
Value Operation
0: Disabled.
1: Enabled.
Null Specifies a list of URI authority components
(optionally, including scheme and path
components) to be trusted.
A URI received in a push request is only used to
obtain push content, if it matches one of these
values.
The list can contain up to 255 characters.
Comments on this document? infodev@avaya.com
Table continues...
108