Initial setup and connectivity
2. Attach one end of the Ethernet cable to the 10/100 network port of the phone and the other
end to the wall jack.
3. Attach the phone to the wall mount bracket by inserting the two upper tabs of the wall mount
bracket into the slots on the back of the phone. The lower pair of tabs rest against the back
of the phone and ensure that the phone does not move when the keys are pressed.
Installing the phone
Before you begin
You must do the following:
• Configure the file server.
November 2017
Installing and Administering Avaya J129 IP Phone in third-party call control setup
Comments on this document? infodev@avaya.com
40